Nanjing Glarun-Atten Technology Co.,Ltd
Main products:signal generator,spectrum analyzer,function generator
Products
Contact Us
  • Contact Person : Ms. Ho Tina
  • Company Name : Nanjing Glarun-Atten Technology Co.,Ltd
  • Tel : 086-755-86021384
  • Fax : 086-755-86021347
  • Address : Guangdong,Shenzhen,Building A29,Tanglang Industrial Zone,Xili,Nanshan Shenzhen 518055,P.R.China
  • Country/Region : China
  • Zip : 518055

ATFXXB function generator

ATFXXB function generator
Product Detailed
Over voltage,over current short circuit protection reverse voltage protection

ATFxxD series Function Generator(ATF20D,ATF40D)

Introduction

ATFxxD series Function Generator(ATF20D,ATF40D) uses Direct Digital Synthesis(DDS) technology.Its outstanding performance and system features make it a perfect solution for your testing requirement.The simplified and optimized design of the front panel dual-language(English/Chinese) TFT display interface make your testing much easier for operation and observation.Additionally,the extendable optional functions can also improve your system characteristics.

Features

Direct digital synthesis(DDS) technology,2 independent output channels

3.5-inch TFT LCD display

32 kinds of standard or build-in fixed waveforms

Minimum stable output waveform:1mV(50Ω)

Multiple modulation functions:FM,FSK,ASK,PSK

Frequency sweep,amplitude sweep,burst and A+B functions

Count the frequency,period,amplitude RMS value or peak-to-peak value

Over voltage,over current,short circuit protection,reverse voltage protection

Optional configuations:RS232interface,USB interface,frequency counter,Power Amplifier

Technical specifications Output A characteristics

WAVEFORM

Waveform type

Sine,square,pulse,DC

Waveform length

4~16000 points

WAVEFORM

WAVEFORM

Sample rate

180Msa/s

Waveform amplitude resolution

10 bits

Sinusoidal Harmonic Rejection

≥50dBc(≤1MHz),≥40dBc(1MHz~20MHz)

Sine wave Total distortion

≤0.5%(20MHz~40MHz)

Pulse wave and square wave

Rise or fall time: ≤20ns,overshoot

Square wave duty cycle

50%

Frequency

Frequency range

40mHz~the maximum frequency,resolution 40Mhz

40uHz~1kHz,resolution:40uHz

Frequency accuracy

±(5X10-5+40mHz)

Amplitude

Amplitude range

2mVpp~20Vpp(high impedance)

Resolution: 20mVpp(>2V),2mVpp(<2V)

Amplitude resolution

20mVpp(>2V),2mVpp(<2V)

Amplitude accuracy

±(1%+2mVrms)

Amplitude flatness

±5%(freq.<1MHz), ±10%(freq.1MHz~10MHz)

±20%(freq.10MHz~60MHz)

Amplitude stability

±0.5%/3hours

Output impedance

50Ω

Sine wave amplitude setting range

1mVpp~10Vpp,when output freq. ≤10MHz

1mVpp~5Vpp,when output freq. ≤40MHz

1mVpp~2Vpp,when output freq. ≥40MHz

Amplitude setting range

2mVpp~20Vpp,when output freq. ≤10MHz

2mVpp~10Vpp,when output freq. ≤40MHz

2mVpp~4Vpp,when output freq. ≥40MHz

Offset

Offset range

±10V(high impedance)

Offset resolution

20mV

Offset accuracy

±(1%+20mV)

Sweep

Sweep type

Linear sweep of frequency of amplitude

Sweep range

Free to set the start and stop points

Sweep step

Larger than any figure of the resolution

Sweep rate

10ms~60s/step

Sweep mode

Up,Down,Up-Down

Manual sweep

Step/time

FM

Modulation signal

Internal or external waveform

FM Deviation

0%~20%

AM

Modulation signal

Internal or external waveform

FM Depth

0%~120%

Shift keying

FSK

Free to set hop and the carrier frequency

ASK

Free to set hop and the carrier amplitude

PSK

Hop Phase:0~360,max resolution:11.25

Alternate rate

10ms~60s

Technical specifications Output A characteristics

WAVEFORM

Waveform type 32 kinds of waveforms,like sine,square,triangle,sawtooth,ladder etc

Waveform length 1024 points

Sample rate 12.5Msa/s

Amplitude resolution 8 bits

Frequency

Frequency range 40mHz~1MHz(sine)10mHz~100kHz(other waveforms)

Frequency resolution 10mHz

Frequency accuracy ±(1X10-5+10mHz)

Amplitude

Amplitude range 50mVpp~20Vpp(high impedance)

Amplitude Resulution 20mVpp

Output impedance 50Ω

Harmonic

Harmonic time 0.1~250.0 times

Harmonic frequency <1MHz

Phase adjustment coarse adjustment:11.25 degree/step,fine ajustment:2 degree/step

Burst

Channel B signal is used as burstsignal

Frequency of channel B 40mHz~1MHz

Burst frequency 30mHz~50kHz

Burst count 1~65000 cycles

Burst mode continuous burst and single burst

TTL

Waveform :rise/fall time 20ns(squre)

Frequency 40mHz~1MHz

Amplitude:TTL,CMOS compatible,low level <0.3V,high level>4V

General characteristics

Power supply:AC110V(1±10%)

Frequency 50Hz(1±5%)

Power consumption:<45VA

Operating temperature:0°C to 40°C

Operating humidity:80%R.H

Operating characteristics:keypad operation and rotary knob operation

Dimensions:415X295X195

Display:TFT display,320*240

Weight:3.5Kg

Accessories included

Standard

ATFxxB series DDS function generator

Power cord:1pc

Q9 testing cable:1pc

Q9 BNC-clip test lead:1pc

User’s Guide:1pc

RS232 cable(optional):1pc

Optional parts

RS232 interface USB universal serial bus interface power amplifier frequency counter

ATFXXB function generator



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.