Nanjing Glarun-Atten Technology Co.,Ltd
Main products:signal generator,spectrum analyzer,function generator
Products
Contact Us
  • Contact Person : Ms. Ho Tina
  • Company Name : Nanjing Glarun-Atten Technology Co.,Ltd
  • Tel : 086-755-86021384
  • Fax : 086-755-86021347
  • Address : Guangdong,Shenzhen,Building A29,Tanglang Industrial Zone,Xili,Nanshan Shenzhen 518055,P.R.China
  • Country/Region : China
  • Zip : 518055

27V soldering station

27V soldering station
Product Detailed
low-voltage output and stable impedance grounding Stainless steel heating element, temperature probe

Product characteristics of AT969A

Stainless steel heating element, temperature probe and soldering tip in close contact.   Temperature sensitive, back to the temperature rapidly, extending the life of heating element.

Split design of heating element and soldering iron, Soldering tip is compatible international brand, cost-saving and easy to replace.

27V low-voltage output and stable impedance grounding, to the absolute protection of sensi   tive components and the safety of the user.

Intelligent digital control and precise temperature control for stability.

Intelligent temperature card management, to prevent accidental temperature change by operator.

The digital temperature calibrations, accurate calibration.

Automatic sleep function to save energy, 20 minutes of non operation, automatically enters sleep function. After 40minutes, automatically cut off power supply. Upon wake up

Technical Specifications

Input Voltage: 220V ±10% 50Hz

Output voltage: 24V AC 

Temperature range: 150~450°C

(200-480°C,AT969A)

Temperature lock method: card (AT969D)

Power consumption: 60W  

Leak resistance of soldering tip : < 2 Ohm

Leak voltage of soldering tip: <5mV

Dimension of iron tip: AT-900M

Parts List

ATTEN 969 handles

1PC

Iron holder

1PC

Clean sponge

1PC

Heating element

Stainless steel,2 cores,60W

ATTEN INSTRUMENTS

RF Microwave Instruments

RF Microwave Components

Spectrum Analyzers.Regulated DC Power Supply

Switching DC Power Supply.Digital Storage Oscilloscope

Signal Generator.Attenuator.Amplifier.850 Rework Station

936 Constant Temp Soldering Station

Electronic Instruments.Electronic Tools

Procaution

In this instruction manual, “WARNING”and“CAUTION”are defined as follows.

Before use this unit, make sure comply with the following measures, against risk of electric shock or give rise to fire.

In order to ensure body safe, must use the components or accessories that recommended by original factory, otherwise it may cause serious consequences.

It should be maintained by qualified electric technician or service personnel specified by original factory

When the power is on, the tip temperature is between 200°C/392°F and 480°C/896°F.

Since mishandling may lead to burns or fire, be sure to comply with the following precautions.

Do not touch the metallic parts near the tip.

Do not use the product near flammable

     items.

Advise other people in the work area: the unit can reach a very high temperature and should be considered potentially dangerous.

Turn the power off while taking breaks and when finished using the unit.

Before replacing parts or storing the unit, turn the power off and allow the unit to cool down to room temperature.

To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions.

Do not use the unit for applications other than soldering.

Do not rap the soldering iron against the workbench to shake off residual solder, or otherwise subject the iron to severe shocks.

Disconnect the power plug before servicing. Failure to do so may result in electric shock..If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarity qualified person in order to avoid personal injury or damage to the unit.

27V soldering station



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.